| Item type |
紀要論文 / Departmental Bulletin Paper(1) |
| 公開日 |
2015-03-26 |
| タイトル |
|
|
タイトル |
Effect of Inclination Angle on Heat Transfer Characteristics of Closed Two-Phase Thermosyphon |
|
言語 |
en |
| 言語 |
|
|
言語 |
eng |
| 資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
|
資源タイプ |
departmental bulletin paper |
| 著者 |
TERDTOON, P.
SHIRAISHI, M.
MURAKAMI, M.
|
| 著者所属（英） |
|
|
|
en |
|
|
Institute of Engineering Mechanics, University of Tsukuba |
| 著者所属（英） |
|
|
|
en |
|
|
Mechanical Engineering Laboratory |
| 著者所属（英） |
|
|
|
en |
|
|
Institute of Engineering Mechanics, University of Tsukuba |
| 出版者 |
|
|
出版者 |
宇宙科学研究所 |
| 出版者（英） |
|
|
出版者 |
Institute of Space and Astronautical Science |
| 書誌情報 |
en : The Institute of Space and Astronautical Science report. S.P. : The Proceedings of the Symposium on Mechanics for Space Flight 1989
巻 12,
p. 167-173,
発行日 1990-03
|
| 抄録（英） |
|
|
内容記述タイプ |
Other |
|
内容記述 |
The paper presents the results of effect of inclination angle on heat transfer characteristics of thermosyphon. The steel-R113 thermosyphon system was used to investigate with the filling ratio of 80%, 50% and 30%. The heat transfer chracteristics of the thermosyphon is obtained in the range from 90 deg. to the horizontal position. It is found from the experiments that there is a tendency that the transported heat at any inclination angle is higher than that of the vertical state. The ratio of critical heat transfer rate at any inclination angle and that of the vertical state reaches the maximun value of 1.6 in the case of filling ration of 50%. The range of the isothermal operating state depends deeply on the filling ratio. From the preliminary consideration, the effect of inclination angle can be divided into 4 major regions, which are described thoroughly. |
| ISSN |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
0288-433X |
| 書誌レコードID |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AA10455137 |
| 資料番号 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
資料番号: SA0033467000 |
SA0033467.pdf (409.5 kB)
