WEKO3
アイテム
Microscopic Kinematographs Applied to the Research of Metal Cutting.
https://jaxa.repo.nii.ac.jp/records/35783
https://jaxa.repo.nii.ac.jp/records/357835001bdf3-35d2-42be-8be7-67f7c15d23a3
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
SA4415976.pdf (2.5 MB)
|
|
| Item type | 紀要論文 / Departmental Bulletin Paper(1) | |||||||
|---|---|---|---|---|---|---|---|---|
| 公開日 | 2015-03-26 | |||||||
| タイトル | ||||||||
| タイトル | Microscopic Kinematographs Applied to the Research of Metal Cutting. | |||||||
| 言語 | en | |||||||
| 言語 | ||||||||
| 言語 | eng | |||||||
| 資源タイプ | ||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||||
| 資源タイプ | departmental bulletin paper | |||||||
| 著者 |
ISHII, Sadamu
× ISHII, Sadamu
|
|||||||
| 著者所属（英） | ||||||||
| en | ||||||||
| Research Engineer of the Institute | ||||||||
| 出版者 | ||||||||
| 出版者 | 東京帝國大學航空研究所 | |||||||
| 書誌情報 |
東京帝國大學航空研究所彙報 巻 64, p. 799-816, 発行日 1929-12 |
|||||||
| 抄録（英） | ||||||||
| 内容記述タイプ | Other | |||||||
| 内容記述 | The main object of the present investigation is to study the deformation and flow of a metal under the action of a simple cutting tool, especially, to observe the manner of separation of the chip formed: and for this purpose microscopic kinematographs of chips in process of formation under different cutting conditions have been taken. In order to make the observation as simple and direct as possible, the cut studied in the present investigation have all been made on the edge of revolving disk. The face of the disk has been polished and etched, in order to reveal the internal structure and the flow or deformation. The materials used as stocks for the cutting experiments were mild steel, rolled brass, cast iron, and aluminium alloy. The experimental cutting operations have been performed with ordinary carbon-steel parting tool and flattened edge tool, no lubricant being used. The observation of the cutting edge of a tool and the deformation of chip has been made by means of the microscope supported on the tool rest of the lathe. The magnified images of the cutting edge and chips have been photographed by means of the "Ica universal kinamo." The picture were taken from 15 to 20 magnifications for widening the field, but by projecting them for desired magnifications, the mechanism of the action of cutting tools might be clearly observed. From these pictures it appears:- (1) In a brittle metal, such as cast iron, the chip is crushed with little distortion, and the form is very irregular. (2) In a ductile metal, such as an aluminium alloy or mild steel, the distortion of the chip is remarkable and a built-up edge is formed on the cutting edge of tool under a suitable speed and depth of cut, especially when a flattened edge tool is used a built-up edge is easily formed. In this case, the built-up edge is the actual cutting implement, the tool merely serving to support it. | |||||||
| 書誌レコードID | ||||||||
| 収録物識別子タイプ | NCID | |||||||
| 収録物識別子 | AN00162779 | |||||||
| 資料番号 | ||||||||
| 内容記述タイプ | Other | |||||||
| 内容記述 | 資料番号: SA4415976000 | |||||||
