ログイン
言語:

WEKO3

  • トップ
  • ランキング
To
lat lon distance
To

Field does not validate



インデックスリンク

インデックスツリー

メールアドレスを入力してください。

WEKO

One fine body…

WEKO

One fine body…

アイテム

  1. コンテンツタイプ
  2. テクニカルレポート (Technical Report)
  1. 機関資料(JAXA, former ISAS, NAL, NASDA)
  2. 旧機関資料 (JAXA, former-ISAS, NAL, NASDA)
  3. 航空宇宙技術研究所(National Aeronautical Laboratory: NAL)
  4. NAL-TR

二次元阻塞効果に関する実験的研究

https://jaxa.repo.nii.ac.jp/records/44845
https://jaxa.repo.nii.ac.jp/records/44845
68313f30-1ec2-4e2c-a98a-eff6e1192669
名前 / ファイル ライセンス アクション
naltr00591.pdf naltr00591.pdf (762.5 kB)
Item type テクニカルレポート / Technical Report(1)
公開日 2015-03-26
タイトル
タイトル 二次元阻塞効果に関する実験的研究
言語
言語 jpn
資源タイプ
資源タイプ識別子 http://purl.org/coar/resource_type/c_18gh
資源タイプ technical report
その他のタイトル(英)
その他のタイトル Experimental Study about 2-Dimensional Blockage Effect
著者 沢田, 秀夫

× 沢田, 秀夫

沢田, 秀夫

Search repository
SAWADA, Hideo

× SAWADA, Hideo

en SAWADA, Hideo

Search repository
著者所属
航空宇宙技術研究所空気力学第二部
著者所属(英)
en
Second Aerodynamics Division, National Aerospace Laboratory(NAL)
出版者
出版者 航空宇宙技術研究所
出版者(英)
出版者 National Aerospace Laboratory(NAL)
書誌情報 航空宇宙技術研究所報告
en : Technical Report of National Aerospace Laboratory TR-591

巻 591, p. 13, 発行日 1979-11
抄録
内容記述タイプ Abstract
内容記述 通気性のある壁を上下壁に持つ二次元風胴測定部の壁による阻塞効果の量を,風胴上下壁付近の一様流方向に平行な検査線上の静圧分布を測定し利用することにより見積ることのできる式を導いた。この式では,理想的なsolid wall boundaryの条件,又は理想的なopen jet boundaryの条件を課する場合以外では,solid blockage effectとwake blockage effectとを分離して取り扱うことができない。何故ならば,上記静圧分布を、模型による部分とwakeによる部分とに分離できない為である。この式を使って、航空宇宙技術研究所の2m×2m遷音速風胴垂直孔多孔壁測定部で,上下壁の開孔比が20%,左右壁の開孔比が0%に設定した時のblockage factor及びblockage factor ratioを求めた。これらのblockage factor及びblockage factor ratioは,使用された翼型に対しては明瞭な規則性を持っており,この規則性を利用すれば,他の翼型の実験でも阻塞効果の修正は,風胴上下壁付近の静圧分布を実験毎に測定しなくても可能であることがわかった。
抄録(英)
内容記述タイプ Other
内容記述 A new expression is presented for assessing the interference arising from the blockage of a model and its wake, in a two-dimensional wind tunnel with ventilated walls at subsonic speeds. Only static pressure distirbutions along two control lines, which run parallel to the upper and lower walls, at the same distances from the model are needed to estimate. Any assumption concerning the ventilated wall characteristics is not made. Using this expression, the solid and wake blockages cannot be estimated separately, because it is impossible to subdivide the pressure distributions into the part associated with only the model and that due to its wake. Blockage factor and blockage factor ratio were estimated for a two-dimensional test section configuration of the National Aerospace Laboratory’s 2m×2m transonic wind tunnel, in which the open area ratio of the normal perforated walls was set at 20%. The differences in these quantities between airfoils tested were found to be very small and some of their other characteristics were also found. It is impossible to correct the blockage effect without measuring the pressure distributions again, by the use of these characteristics.
ISSN
収録物識別子タイプ ISSN
収録物識別子 0389-4010
資料番号
内容記述タイプ Other
内容記述 資料番号: NALTR0591000
レポート番号
内容記述タイプ Other
内容記述 レポート番号: NAL TR-591
戻る
0
views
See details
Views

Versions

Ver.1 2023-06-20 21:49:51.723256
Show All versions

Share

Mendeley Twitter Facebook Print Addthis

Cite as

エクスポート

OAI-PMH
  • OAI-PMH JPCOAR 2.0
  • OAI-PMH JPCOAR 1.0
  • OAI-PMH DublinCore
  • OAI-PMH DDI
Other Formats
  • JSON
  • BIBTEX

Confirm


Powered by WEKO3


Powered by WEKO3