ログイン
言語:

WEKO3

  • トップ
  • ランキング
To
lat lon distance
To

Field does not validate



インデックスリンク

インデックスツリー

メールアドレスを入力してください。

WEKO

One fine body…

WEKO

One fine body…

アイテム

  1. コンテンツタイプ
  2. テクニカルレポート (Technical Report)
  1. JAXA出版物(種類別)
  2. 研究開発報告 Research and Development Report(略称:RR)
  3. 2017年度
  4. JAXA-RR-17-002E Pressure Gradient Effects on Mean Flow over Axisymmetric Bodies at Incidence in Supersonic Flow: Progress Report of JAXA-NASA Joint Research Project on Supersonic Boundary Layer Transition Part 1

Pressure Gradient Effects on Mean Flow over Axisymmetric Bodies at Incidence in Supersonic Flow: Progress Report of JAXA-NASA Joint Research Project on Supersonic Boundary Layer Transition Part 1

https://doi.org/10.20637/JAXA-RR-17-002E/0001
https://doi.org/10.20637/JAXA-RR-17-002E/0001
f8c0d1e4-75d8-4831-9f22-3300f0cd6c13
名前 / ファイル ライセンス アクション
AA1730004000.pdf AA1730004000.pdf (5.5 MB)
Item type テクニカルレポート / Technical Report(1)
公開日 2017-09-15
タイトル
タイトル Pressure Gradient Effects on Mean Flow over Axisymmetric Bodies at Incidence in Supersonic Flow: Progress Report of JAXA-NASA Joint Research Project on Supersonic Boundary Layer Transition Part 1
言語 en
言語
言語 eng
キーワード
言語 en
主題Scheme Other
主題 3-D Boundary Layer
キーワード
言語 en
主題Scheme Other
主題 Transition
キーワード
言語 en
主題Scheme Other
主題 Computational Fuild Dynamics
資源タイプ
資源タイプ識別子 http://purl.org/coar/resource_type/c_18gh
資源タイプ technical report
ID登録
ID登録 10.20637/JAXA-RR-17-002E/0001
ID登録タイプ JaLC
著者 石川, 敬掲

× 石川, 敬掲

石川, 敬掲

Search repository
徳川, 直子

× 徳川, 直子

徳川, 直子

Search repository
Li, Fei

× Li, Fei

Li, Fei

Search repository
Choudhari, Meelan

× Choudhari, Meelan

Choudhari, Meelan

Search repository
White, Jeffery

× White, Jeffery

White, Jeffery

Search repository
Ishikawa, Hiroaki

× Ishikawa, Hiroaki

en Ishikawa, Hiroaki

Search repository
Tokugawa, Naoko

× Tokugawa, Naoko

en Tokugawa, Naoko

Search repository
Li, Fei

× Li, Fei

en Li, Fei

Search repository
Choudhari, Meelan

× Choudhari, Meelan

en Choudhari, Meelan

Search repository
White, Jeffery

× White, Jeffery

en White, Jeffery

Search repository
著者所属
ASIRI Inc.
著者所属
宇宙航空研究開発機構航空技術部門(JAXA)
著者所属
National Aeronautics and Space Administration (NASA)
著者所属
National Aeronautics and Space Administration (NASA)
著者所属
National Aeronautics and Space Administration (NASA)
著者所属(英)
en
ASIRI Inc.
著者所属(英)
en
Aeronautical Technology Directorate, Japan Aerospace Exploration Agency (JAXA)
著者所属(英)
en
National Aeronautics and Space Administration (NASA)
著者所属(英)
en
National Aeronautics and Space Administration (NASA)
著者所属(英)
en
National Aeronautics and Space Administration (NASA)
出版者
出版者 宇宙航空研究開発機構(JAXA)
出版者(英)
出版者 Japan Aerospace Exploration Agency (JAXA)
書誌情報 宇宙航空研究開発機構研究開発報告
en : JAXA Research and Development Report

巻 JAXA-RR-17-002E, p. 1-40, 発行日 2017-09-15
抄録(英)
内容記述タイプ Other
内容記述 Boundary layer transition along the leeward symmetry plane of axisymmetric bodies at zero and non-zero angles of incidence in supersonic flow was investigated numerically as part of joint research between the Japan Aerospace Exploration Agency (JAXA) and National Aeronautics and Space Administration (NASA). Mean flow over five axisymmetric bodies (namely, a Sears-Haack body, a semi-Sears-Haack body, two straight cones and a flared cone) was analyzed to investigate the effects of axial pressure gradient, freestream Mach number, and angle of incidence on boundary layer transition. Computations revealed the strong effects of axial pressure gradient on boundary layer profile in the vicinity of the leeward symmetry plane, highlighting the three-dimensional dynamics associated with increasing build-up of secondary flow under an adverse axial pressure gradient. Independent flow solutions obtained using different flow solvers and different grids at JAXA and NASA, respectively, were in good agreement with each other. Slight differences between the two sets of solutions are attributed to a combined effect of the differences between respective thermal wall boundary conditions, numerical grids, and flow solvers. The difference due to the thermal boundary condition is confirmed to be physical and was observed for all flow conditions, as expected. However, the other differences were rather minor, and were noticeable only for the straight cone and flared cone configurations. The conditions under which these minor differences are observed and the magnitudes of these differences remain an open question. Despite being coarser than the NASA grids, the JAXA grids are shown to be sufficient for providing basic state definition for the linear stability analysis. Specifically, the results demonstrate that appropriate grid spacing had been used to obtain accurate boundary layer profiles. The present report represents part 1 of a two-part document based on the joint computational effort. Part 1 is devoted to the results of mean flow computations and the results of linear stability analyses and the corresponding experiments are described in part 2.
内容記述
内容記述タイプ Other
内容記述 形態: カラー図版あり
内容記述(英)
内容記述タイプ Other
内容記述 Physical characteristics: Original contains color illustrations
ISSNONLINE
収録物識別子タイプ ISSN
収録物識別子 2433-2216
資料番号
内容記述タイプ Other
内容記述 資料番号: AA1730004000
レポート番号
内容記述タイプ Other
内容記述 レポート番号: JAXA-RR-17-002E
戻る
0
views
See details
Views

Versions

Ver.1 2023-06-20 21:37:16.763446
Show All versions

Share

Mendeley Twitter Facebook Print Addthis

Cite as

エクスポート

OAI-PMH
  • OAI-PMH JPCOAR 2.0
  • OAI-PMH JPCOAR 1.0
  • OAI-PMH DublinCore
  • OAI-PMH DDI
Other Formats
  • JSON
  • BIBTEX

Confirm


Powered by WEKO3


Powered by WEKO3