| Item type |
テクニカルレポート / Technical Report(1) |
| 公開日 |
2015-03-26 |
| タイトル |
|
|
タイトル |
液酸・液水ロケットタンクの構造用金属部材の室温, 77Kおよび4Kにおける強度特性の研究 |
| 言語 |
|
|
言語 |
jpn |
| キーワード |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
mechanical properties, fracture toughness, fatigue crack, aluminum alloys, stainless steel, cryogenic temperature, weld joint, residual strength, crack opening displacemen, crack analysis |
| 資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_18gh |
|
資源タイプ |
technical report |
| その他のタイトル（英） |
|
|
その他のタイトル |
Fracture and Fatigue Characteristics of Metals for LOX/LH2 Rocket Tank Structure Tested at 4K, 77K and Room Temperature |
| 著者 |
寺田, 博之
中井, 暎一
飯田, 宗四郎
浜口, 泰正
角田, 義秋
TERADA, Hiroyuki
NAKAI, Eiichi
IIDA, Soshiro
HAMAGUCHI, Yasumasa
KAKUTA, Yoshiaki
|
| 著者所属 |
|
|
|
航空宇宙技術研究所機体第二部 |
| 著者所属 |
|
|
|
航空宇宙技術研究所機体第二部 |
| 著者所属 |
|
|
|
航空宇宙技術研究所機体第二部 |
| 著者所属 |
|
|
|
航空宇宙技術研究所機体第二部 |
| 著者所属 |
|
|
|
航空宇宙技術研究所機体第二部 |
| 著者所属（英） |
|
|
|
en |
|
|
Second Airframe Division, National Aerospace Laboratory(NAL) |
| 著者所属（英） |
|
|
|
en |
|
|
Second Airframe Division, National Aerospace Laboratory(NAL) |
| 著者所属（英） |
|
|
|
en |
|
|
Second Airframe Division, National Aerospace Laboratory(NAL) |
| 著者所属（英） |
|
|
|
en |
|
|
Second Airframe Division, National Aerospace Laboratory(NAL) |
| 著者所属（英） |
|
|
|
en |
|
|
Second Airframe Division, National Aerospace Laboratory(NAL) |
| 出版者 |
|
|
出版者 |
航空宇宙技術研究所 |
| 出版者（英） |
|
|
出版者 |
National Aerospace Laboratory(NAL) |
| 書誌情報 |
航空宇宙技術研究所報告
en : Technical Report of National Aerospace Laboratory TR-619
巻 619,
p. 24,
発行日 1980-07
|
| 抄録（英） |
|
|
内容記述タイプ |
Other |
|
内容記述 |
In connection with the development of rocket tank structure containing cryogenic liquid propellant, mechanical properties and fracture toughness were examined for several candidate metals of the structure in order to obtain the fundamental design data at 4K, 77K and room temperature. Materials tested in the present study were three kinds of aluminum alloy(2219-T87, 2014-T651, ZK141-T6) and one stainless steel(301-H). For each alloy, the strength of welded joint as well as the parent metal was colsely examined. Crack propagation behavior of 2219-T87 parent metal under low cycle fatigue loading at 4K was also reported in the paper. The effects of location and orientation of a crack, notch acuity and residual stress on fracture toughness were studied by using sheet specimens with a through-the-thickness crack or a surface crack. All test results were analysed by the technique of the linear fracture mechanics theory. It was observed that the fracture toughness of welded joint and parent metals of 2219-T87 and ZK141-T6 consistently increases or remains constant as the testing temperature is decreased, regardless of the location or orientation of a crack. In terms of the other two alloys tested, no consistent trend of fracture toughness with testing temperature was observed. It was shown that the strength of the panels with various sizes of cracks can be successfully presented using a modified residual strength diagram, which was originally proposed by Feddersen. On low cycle fatigue testing conducted at 4K, crack extension, which was not possible to observe directly as the specimen was enclosed in a cryostat, could be measured by tracing crack opening diaplacement(COD) at each loading cycle. In order to calculate crack length analytically from measured COD, a work-hardening crack model was employed, which gave quantitatively good agreement with the actual crack length. The testing results lead to the following relation for the crack propagation rate of the 2219-T87 parent metal: da/dn=4.8×10(exp -13)ΔK5.1 |
| ISSN |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
0389-4010 |
| 資料番号 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
資料番号: NALTR0619000 |
| レポート番号 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
レポート番号: NAL TR-619 |
naltr00619.pdf (1.9 MB)
