| Item type |
紀要論文 / Departmental Bulletin Paper(1) |
| 公開日 |
2015-03-26 |
| タイトル |
|
|
タイトル |
Modeling and Evaluation of Combustion Process of a Three-valve Stratified Charge Engine |
|
言語 |
en |
| 言語 |
|
|
言語 |
eng |
| 資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
|
資源タイプ |
departmental bulletin paper |
| 著者 |
ASANUMA, T.
BABU, GAJENDRA M. K.
YAGI, S.
|
| 著者所属（英） |
|
|
|
en |
|
|
Department of Mechanical Engineering, Faculty of Engineering, Indian Institute of Technology |
| 著者所属（英） |
|
|
|
en |
|
|
Honda R & D Co., Ltd. |
| 出版者 |
|
|
出版者 |
東京大学宇宙航空研究所 |
| 出版者（英） |
|
|
出版者 |
Institute of Space and Aeronautical Science,University of Tokyo |
| 書誌情報 |
en : ISAS report/Institute of Space and Aeronautical Science,University of Tokyo
巻 43,
号 2,
p. 15-28,
発行日 1978-04
|
| 抄録（英） |
|
|
内容記述タイプ |
Other |
|
内容記述 |
This papaer describes the development of a mathematical model for the compression, combustion and expansion process of a stratified charge engine, consisting of an auxilary combustion chamber with an inlet valve and a main combustion chamber with both the inlet and exhaust valves. After calculating the mixture formation at the end of compression process, a simple combustion model was developed to compute the gas temperature, gas pressure and the rate of formation of NO and CO at each crank angle, using the basic energy equation and reaction kinetics for both the auxilary and main chambers. The above calculations were also extended for the expansion process. The evaluation of the model was carried out by comparing the computed and experimental data. A satisfactory correlation was observed between them. |
| ISSN |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
0372-1418 |
| 書誌レコードID |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AA00675986 |
| 資料番号 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
資料番号: SA2401293000 |
SA2401293.pdf (827.3 kB)
