| Item type |
紀要論文 / Departmental Bulletin Paper(1) |
| 公開日 |
2015-03-26 |
| タイトル |
|
|
タイトル |
加工硬化した鋼材の疲労(第3報) |
| 言語 |
|
|
言語 |
jpn |
| 資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
|
資源タイプ |
departmental bulletin paper |
| その他のタイトル（英） |
|
|
その他のタイトル |
On the Fatigue of Work-hardened Steel (3rd Report) |
| 著者 |
福井, 伸二
佐藤, 四郎
FUKUI, Shinji
SATO, Shiro
|
| 著者所属 |
|
|
|
東京大學理工學研究所 |
| 著者所属 |
|
|
|
東京都立大学工学部 |
| 著者所属（英） |
|
|
|
en |
|
|
THE INSTITUTE OF SCIENCE AND TECHNOLOGY, UNIVERSITY OF TOKYO |
| 出版者 |
|
|
出版者 |
東京大学理工学研究所 |
| 書誌情報 |
東京大學理工學研究所報告
巻 5,
号 6,
p. 259-264,
発行日 1951-12-30
|
| 抄録（英） |
|
|
内容記述タイプ |
Other |
|
内容記述 |
In the previous works, the fatigue limits under the tension-compression, or bending stresses were studied about specimens of usual carbon steel (0.22%C) after plastically deformed by statical tensile, or compressive stresses. In this paper, the torsional fatigue limits were studied in the same. way as in the previous works. Arranging the experimental results by the absolute values of natural strain corresponding to the pre-working stresses, the fatigue limits changed similarly both for tensile and compressive pre-working. Comparing with the annealed states, the fatigue limits decreased few percentage for small strain, and then increased about 15-20% for large strain. This tendency seemed to be similar to that of the proportional limits for torsion, and also to those of the fatigue limits for tension-compression, or bending stresses. (Received November 28, 1951) |
| ISSN |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
0371-6090 |
| 書誌レコードID |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AN00162611 |
| 資料番号 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
資料番号: SA2410112000 |
SA2410112.pdf (538.1 kB)
